Grün Engineering
Stainless flue primary with a test point rising into a twin wall header hung from strut on a block wall
All projects
Boiler and water heater flues GE1513

1-5 Peel Street

Kensington, boiler and water heater flues

Type
Boiler flue
Location
Kensington, London
Status
Complete
System
Twin wall insulated flue

The job

Boiler and water heater flues in a tight plant room.

We designed, supplied and installed the flues for two wall hung condensing boilers and a floor standing water heater.

Each appliance connects with a Ø100 primary into a Ø150 twin wall insulated header. The headers run at high level on strut and drop rods, then out to short external stacks.

The primaries have test points, so the flue can be checked without taking it apart.

Ø150

twin wall insulated headers

3

appliances connected

On site.

Site photographs. Tap a photo to see it larger.

1-5 Peel Street, Kensington, boiler and water heater flues. A boiler primary with its test point, rising into the header.
1-5 Peel Street, Kensington, boiler and water heater flues. The water heater flue and bend into the header.

Scope

What we delivered.

  • Flue design from the plant room drawings
  • Ø100 primaries into Ø150 headers
  • High level supports on strut and drop rods
  • Short external stacks

Project details

  • Boiler flue
  • London
  • Design, supply and install
Similar workBoiler flues

Got a job like this?

Price normally within 24 hours of drawings or survey information.

Send drawings Get a price