Stainless insulated exhaust stack with a bent outlet rising from the roof of a generator enclosure, braced by a galvanised strut frame

Generator exhaust GE2392

Factory

Coventry, generator exhaust

Type: Generator exhaust
Location: Coventry, West Midlands
Status: Complete
System: Insulated twin wall exhaust

The job

An exhaust stack for a standby generator.

We designed, supplied and installed the exhaust flue for a 610kVA standby generator at a factory in Coventry in April 2022.

The exhaust leaves the top of the generator enclosure and rises about 4 metres in insulated twin wall flue, Ø200 inside, so it discharges well clear of the unit.

We surveyed the site, drew the route in CAD and fitted it with our own fixings and supports.

610kVA

standby generator

Ø200

insulated exhaust flue

On site.

Site and survey photographs. Tap a photo to see it larger.

Looking up at the stainless exhaust stack and its galvanised support frame above the generator enclosure, with bare trees behind — Factory, Coventry, generator exhaust. The stack and its support frame from the side.

The generator compound beside the factory, with the new exhaust stack rising above the enclosure behind a mesh fence — Factory, Coventry, generator exhaust. The stack in its compound beside the factory.

Generator exhaust outlet with a rain cap on top of a grilled generator enclosure, before the new stack was fitted — Survey photo. Factory, Coventry, generator exhaust. The generator exhaust outlet before the new flue.

Scope

What we delivered.

Site survey
Calculations and CAD drawing
Job specific RAMS
Insulated twin wall exhaust, Ø200
Strut supports and fixings
Certificate of conformity

Project details

Generator exhaust
West Midlands
Design, supply and install

Got a job like this?

Price normally within 24 hours of drawings or survey information.

Send drawings Get a price