Grün Engineering
A stainless insulated flue header at ceiling level with three boiler connections dropping to boilers covered in red protective sheeting
All projects
Boiler flue GE2272

No.1 Creekside

Deptford, boiler flue

Type
Boiler flue
Location
Deptford, London
Status
Complete
System
Insulated twin wall flue

The job

A shared flue for three boilers.

We designed, supplied and installed the flue system for three gas condensing boilers at No.1 Creekside in Deptford, London, in October 2022.

Each 100kW boiler connects into a shared Ø180 insulated twin wall header at high level in the plant room. The header turns into a riser that runs up through the building in its own shaft.

The system was smoke tested and passed, and was signed off with a certificate of conformity in January 2023.

3

gas boilers served

100kW

each boiler

Ø180

shared insulated header

On site.

Site photographs. Tap a photo to see it larger.

No.1 Creekside, Deptford, boiler flue. The shared header with its three boiler connections.
No.1 Creekside, Deptford, boiler flue. Each boiler connects into the header from below.
No.1 Creekside, Deptford, boiler flue. The header entering the riser shaft, with a drain at the base.
No.1 Creekside, Deptford, boiler flue. The riser passing through a service cupboard on an upper floor.

Scope

What we delivered.

  • Site survey
  • Flue calculations and CAD drawing
  • Job specific RAMS
  • Ø180 insulated twin wall header and riser
  • Supports and fixings
  • Smoke test, passed
  • Certificate of conformity and O&M documents

Project details

  • Boiler flue
  • London
  • Design, supply and install
Similar workBoiler flues

Got a job like this?

Price normally within 24 hours of drawings or survey information.

Send drawings Get a price